The Coil Machine Operator runs a programmable coil-forming machine that converts stainless steel tubing into precision coils. This is a hands-on, physically active role focused primarily on coil operations, with some basic saw and machining work. The operator loads material, makes manual adjustments during the process, and verifies work using drawings and basic measuring tools.
The role requires the ability to work independently after daily scheduling discussions. Programming is minimal and training is provided. Lifting up to 35 lbs may be required. This is a first-shift position (6:00 AM – 2:30 PM) with no overtime.
COIL OPERATOR:
- Interpret drawings and material selections
- Setup the coil machine per the drawing
- Pull material and issue to work order in the ERP System
- Measure, mark, scribe dimensions and reference points on material or work piece as guide for subsequent machining. Understand the use of calipers, micrometers and dimension on a tape measure.
- Roll coil per print and determine if adjustment needs to be made in order to meet inspection criteria.
- Verify conformance of finished work piece to drawing and all specifications. Transfer heat number to machined part.
- Print labels that include part number, job number and heat number of material and affix to parts.
- Sign work order and move LeanKit card to inspection.
- Make proper labor and time reports.
- Work in a clean and orderly fashion to maintain area standards of 5S.
- Participate in Lean/Continuous Improvement initiatives.
MACHINIST:
- Interpret sketches, drawings, manuals, specifications or sample part to determine dimensions and tolerances of finished work piece, sequence of operations and setup requirements.
- Select and secure holding fixtures, cutting tools, and materials on machines such as mills, lathes, jig borers, grinders and shapers.
- Calculate and set controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input or edit computerized machine control media.
- Check and observe machine operation to detect malfunctions or out-of-tolerance machining and adjust machine controls or control media as required.
- Verify conformance of finished work piece to specifications.