At MPC, we’re committed to being a great place to work – one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment.
The Los Angeles Marathon Refinery has an opening for an experienced Chemical Process Engineer who will provide technical support for plant operations. They will be assigned a specific unit or units within the Refinery with responsibilities of daily monitoring and troubleshooting of their areas, process optimization, and design and development of capital projects as well as major modifications to existing units. Process Engineers will apply state-of-the-art technology with regard to process simulation and optimization, recommend programs and procedures to increase the economic efficiency of refining operations, and work in a team environment with line operators and other engineers to maintain and troubleshoot control system problems as well as develop advanced control applications for their process units.
Available onsite schedules are a 9/80's or 4 days onsite/1 day remote. Must provide occasional after-hours support and support TAR approximately once a year.
Key Responsibilities
AREA TEAM SUPPORT
Communicate unit performance, optimization opportunities, and environmental performance. Assist troubleshooting efforts with unit upsets, product quality incidents, not meeting production plans, etc.
Support Small to medium capital project process engineering.
Monitors process performance and identifies
opportunities for improving yield, energy efficiency,
and reliability. May plan test runs and recommends
projects to address opportunities.
Maintain current work lists with priorities.
Support Key Performance Indicators (KPI) included as part of routine reporting (WABT curve, fouling, chemical and catalyst budgets, yields, etc.)
Manage catalyst performance and coordinate catalyst change timing
Support unit operation within environmental limits.
Assists in planning and executing
turnarounds/outages, including scope development
and post-event evaluations
Support and review operations procedures for start-up and shutdown.
Review and approve vendor chemical programs.
Inspect vessel internals for proper installation and tolerances of components
Monitor and approve catalyst loading
Publish recommendation memos and turnaround reports
Maintains and updates process documentation.
Troubleshoots and maintains unit mass balance
within tolerance.
Interact and communicate with Board Operators daily.
Participate in Alarm rationalization.
Understand controls logic and any Advanced Process Controls (APC)
Support inclusive of energy, water, and tank farm systems
Supports collaboration with operations, engineering,
and maintenance teams to resolve operational
challenges. Develops and maintains relationships
with console and field operators.
PROJECT PROCESS LEADERSHIP
Work with Area Team to develop project ideas and submit project request forms (PRF) with a memo detailing economic benefits and justification
Work with process controls group to develop / implement APC
Provide process design basis
PROCESS OPTIMIZATION
Review unit KPI’s for the month and include analyses when appropriate with supporting data. Include unit performance on key economic drivers. Include recommendations for performance and reliability improvements and compliance with environmental permits.
Participate, attend and present in Advisory Group Calls and Face to Face Technology Meetings.
Schedule reviews with vendors and Technologists.
Work with Technologists to understand and implement unit best practices.
Set outside feedstock properties and discuss opportunity feeds with Product Control.
Know and understand the process fully to identify constraints.
Work with Product Control for setting appropriate unit targets.
Monitor and optimize Unit yield.
Participate as key decision maker for selecting programs, catalyst loads, etc.
Communicate with Product Control and other relevant groups regarding:
Catalyst budget curves / current performance
Operation against / changing process constraints
Unit actual yields vs Linear Programming (LP) model yields – monitor accuracy of LP yields
Understand Product Control targets and ensure proper implementation / understanding by Operations
Support Product Control on required rigorous model runs as necessary
TECHNICAL PSM STEWARDSHIP
Support Critical Process Variables and Not to Exceed (CPV/NTE) Maintenance and Operating Limits.
Lead and Participate in the MOC (Management of Change) process.
Perform environmental calculations (leaks, maximum intended inventory, etc.)
Lead Incident Investigations for process related events.
Participates in hazard evaluations, incident
investigations, and management of change.
Support instrumentation Process Safety Information (PSI) and troubleshooting (thermowell calculations, orifices, etc.).
Provide and approve special chemical procedures.
Education, Experience and Skills
Minimum Qualifications:
Must have a Bachelor’s degree in Chemical Engineering discipline. (Education must be obtained/completed prior to start date)
Must have a minimum of 4 years as a Chemical Engineer in the oil/gas refining industry.
Must be proficient in Microsoft: Word, Excel and Outlook.
Must be able to wear appropriate PPE in the refinery (respirator), be able to physically perform all tasks in the field and take hair drug test and physical.
Must have a clean and valid driver’s license. (MPC determines valid status.)
Must be legally authorized to work in the US without the need for future VISA sponsorship.
Travel Requirement is 5% or less.
Must be able to work: one of the available onsite schedules: 9/80's or 4 days onsite/1 day remote with the ability to provide occasional after-hours support and support TAR approximately once a year.
****Relocation may be available.****
This position belongs to a family of jobs with increasing responsibility, competency and skill level. Actual position title and pay grade will be based on the selected candidate’s experience and qualifications.
Learn more about Marathon Petroleum’s benefits at www.mympcbenefits.com.
As an energy industry leader, our career opportunities fuel personal and professional growth.
Location:
Los Angeles CA RefineryJob Requisition ID:
00021771Pay Min/Max:
$106,900.00 - $184,300.00 SalaryGrade:
11 - 12Location Address:
2101 E Pacific Coast HwyAdditional locations:
Carson CA RefineryEducation:
Bachelors (Required)Employee Group:
Full timeEmployee Subgroup:
RegularMarathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenshipor any other status protected by applicable federal, state, or local laws.If you would like more information about your EEO rights as an applicant, click here.
If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at talentacquisition@marathonpetroleum.com